Command Clear Outdoor Large Window Hooks

Command

To apply 1 Use only on windows. Important: apply to a clean and dry surface. To clean, use a cloth dampened with water or isopropyl rubbing alcohol. Do not use household cleaners. Separate strips. 2 Remove black "wall side" liner and apply strip to desired location. Press firmly along the entire strips for 30 seconds. 3 Remove blue liner and apply hook to strip. Make sure tab is accessible for future removal. 4 Press firmly along the entire hook for 30 seconds. Wait 1 hour before use. To remove 1 Never pull strip towards you. 2 Hold hook gently to prevent hook for snapping fingers. DO NOT press hook against wall. 3 Stretch straight down along wall at least 38 cm (15 in) until strip releases from wall. Important: failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit commandstrips.ca Note: apply to surfaces above -9°C (15°F). May lose adhesion below -29°C (-20°F) or above 51 °C (125 °F). Intended for outdoor use only. Not recommended for use on rough surfaces, such as cement board, brick or rough-sawn wood. Not intended for picture hanging. Hook can be reused with Command® Large Outdoor Clear Strips.

We seek to be accurate with respect to the ingredients, nutritional information, product images and descriptions listed on our website, however, this information may change from time to time. Please always refer to the product package for the most current and accurate ingredient and nutrition information or other product information.