Iron Out Rust Stain Remover 850 g

Iron Out

Directions for use (read entire label before using): always pre-test in an inconspicuous area. For stubborn stains, increase dosage and/or contact time. Use: dishes, glass, plasticware; Super Iron Out: ⅓ cup (83 ml); directions: 1. Dissolve 1/3 cup (83 ml) in 1 gal. of warm water. 2. Soak articles 5 min., or until stains are gone. 3. Rinse thoroughly. Repeat as needed. Use: dishwasher/washing machine; Super Iron Out: ½ cup (125 ml); directions: 1. Add 1/2 cup (125 ml) to empty machine. 2. Run machine through normal cycle using water only. Repeat as needed. Note: DO NOT OPEN MACHINE MID-CYCLE. Use: tubs, sinks, tile; Super Iron Out: ¼ cup (62 ml); directions: 1. Wet area to be cleaned. 2. Apply powder to damp sponge or cloth. 3. Rub lightly until stains are gone. Rinse. Note: not recommended for older, worn or chipped porcelain cast iron fixtures. Use: toilet bowl & water tank; Super Iron Out: ⅓ cup (83 ml); directions: remove cleaners or deodorant from bowl or tank. Flush. Bowl 1. Add 1/2 cup (125 ml) to water in bowl. 2. Scrub stained area with brush. 3. Let stand until stains are gone. Flush tank 1. Raise water level above stain line if possible. 2. Add 1/2 cup (125 ml). 3. Let stand overnight or until stains are gone. Use: white laundry & fabrics/laundry with color or embroidery; Super Iron Out: ½ cup (250 ml); directions: note: DO NOT USE WITH BLEACH OR PEROXIDE. White 1. Add 1/2 cup (125 ml) to warm water as washer is filling. 2. Add clothes and let soak for 5 minutes, if possible, by stopping machine. 3. Add detergent and resume wash/rinse cycle. 4. Dry as usual. Colour - test all colours before using. Use only on colorfast dyes. Note: wash each item separately using the white clothes instructions. Product may irreparably damage colours and embroidered logos. Use: water softener; Super Iron Out: 1 cup (250 ml); directions: all softeners on iron bearing water require Super Iron Out as preventative maintenance and to eliminate iron buildup. First application 1. Dissolve 1 cup in 1/2 gal. cold water. 2. Pour directly into brine well (for softeners with no brine well, pour directly into salt tank when salt level is low). 3. Manually regenerate softener. Repeat for heavily fouled unit. Regular use 1. Add 1/4 cup per 40 lbs. of salt. 2. Layer for continuous treatment. Cabinet models - use for periodic cleaning only. Follow first application instructions above. Note: if taste or odor is detected in tap water, manually regenerate softener, then run cold water until odor is gone. For helpful tips, money saving coupons and information on the family of Super Iron Out products visit: www.superironout.com



Calories	% Daily Value
Fat
Saturated
+ Trans
Polyunsaturated
Omega6
Omega3
Monounsaturated
Carbohydrate
Fibre
Sugars
SugarAlcohols
Protein
Cholesterol
Sodium
Potassium
Calcium
Iron

We seek to be accurate with respect to the ingredients, nutritional information, product images and descriptions listed on our website, however, this information may change from time to time. Please always refer to the product package for the most current and accurate ingredient and nutrition information or other product information.​